Waterless Car Detailing in Action.

DRI WASH 'n GUARD® Ultra-Ion™ Waterless Carwash™ is extremely versatile; it can be used on any painted surface. It is a far superior and versatile detailing product for cars, RVs, boats, motorcycles, airplanes, trucks, bicycles... the list goes on. It is also extremely easy to use.

Unlike conventional car wash and waxes, DRI WASH 'n GUARD® Ultra-Ion™ does not force you to work as fast as possible.

To fully appreciate how easy to use as seeing fantastic results right before your eyes that prior starting your training you’ll find the best way to learn is buy and try DRI WASH 'n GUARD® line of products first for yourself.

Now let’s purchase DRI WASH 'n GUARD® to see DWG in action for yourself.

You’ll be amazed!

In the meantime to appreciate and build your competence in using the DRI WASH ‘n GUARD unfair advantage watch these videos showing the DRI WASH ‘n GUARD team cleaning, sealing, polishing and protecting these very expensive beautiful cars to looking shiny and “showroom” without the mess of traditional car detailing procedures.

Shop NOW

Waterless Wheel Well Detailing:

Applying Dri Wash 'n Guard® Tyre & Exterior Trim Treatment:

This can be a difficult area, especially in winter. If the wheel wells are wet, or have caked-on mud, use a bucket and sponge to clean the area. Avoid soaps, since you will be treating the area with DWG™ products after drying the wheel well. Dry the area with a towel, then apply DWG™ Tyre Treatment - this versatile product works great on all plastic and rubber, IF the wheel wells are plastic lined as many new cars are today. If the wheel well is all metal, use DWG™ Waterless Carwash™, this will protect the metal and reduce dirt build up in the future. If the wheel well is quite dirty, but not so much so that water is required, use a stiff brush to remove dirt, then use the appropriate cleaning product for the material inside the wheel well.

Tips and Tricks for Wheel Well Detailing

• Use a stiff bristled brush if needed, however, do not use a wire brush and make certain the brush is in good condition so you don't scratch plastic or metal with sharp edged bristles.

• Remember to use DWG™ Tyre Treatment on plastic and DWG™ Waterless Car Wash on metal.

• Use terry cloth to apply and wipe down the cleaning product.

SHOP NOW

Getting STarted

Remove all loose articles from the interior, including floor mats, any articles in door or seat storage areas, loose change, papers and personal items. Start by vacuuming the interior, including seat seams, between seats, under seats and between seats and console area and the trunk area. Vacuum the headliner especially if it is cloth. Vacuum the floor mats prior to applying carpet cleaner.

Waterless Fabric, Carpet & Upholstery Detailing:Use a light coat of DWG™ Fabric, Carpet & Upholstery Treatment (FCU) on the interior carpet and the floor mats. Spray the DWG™ FCU onto the carpet. Use a terry cloth towel to remove the dirt from the fabric. Rather than using a rubbing motion, just draw the cloth across the carpet, turning the cloth as often as necessary to continue using a clean surface. This technique picks up dirt more rapidly as the cloth absorbs more dirt. Then wipe down with another clean dry terry cloth. For cleaning upholstery, spray a light coat of DWG™ FCU onto the upholstery, then use a rolled up towel to lightly scrub the surface. Turn the towel often to continue using clean terry cloth. Follow this with a second towel using the same technique. This will ensure that the upholstery is clean and as dry as possible.

Tips and Tricks for Waterless Fabric, Carpet & Upholstery Detailing

• To remove stains, spray the DWG™ FCU directly onto the stain, let soak for just a few seconds, then use a soft bristled brush in a circular motion to scrub the stain. Then use a terry cloth washcloth or towel to remove dirt and excess cleaner.

Waterless Leather & Vinyl Detailing: Leather upholstery requires a quality leather-cleaning product. NEVER use water to clean leather products, it will cause leather to break down and crack. Leather and vinyl should be treated once a month; more if there is heavy wear. DWG™ Leather & Vinyl Treatment will clean, condition, provide UV protection, reduce static and reduce dust build up on your leather and vinyl. Spray DWG™ Leather & Vinyl Treatment onto the surface of the leather, then use a terry cloth wash cloth or small towel to spread and clean the surface. As with other DWG™ products, use a white terry cloth so you can observe the dirty areas becoming cleaned. Buff with another clean terry cloth towel. For vinyl treatment, use the same procedure as leather treatment. Notice that DWG™ Leather & Vinyl Treatment does not make the leather or vinyl appear shiny. The shine that other products will produce on leather and vinyl is actually an oil residue that is very bad for your leather and vinyl. This oil residue will attract dust and dirt and will eventually cause cracking of the surface of you leather and vinyl. DWG™ Leather & Vinyl Treatment contains the all-inclusive benefits of UV protection, cleaner, and conditioner; most other products do not.

Tips and Tricks for Waterless Leather and Vinyl Detailing:

• In hard to reach areas, spray the DWG™ Leather & Vinyl Treatment onto your cleaning rag and not directly onto the surface. This will prevent over-spray that may be difficult to remove.

• Remember to use Leather & Vinyl Cleaner on doors, arm-rests, sun visors, and headliners where these areas are made of leather or vinyl.

SHOP NOW

Waterless Convertible Top Cleaning:

Applying DWG™ Upholstery, Fabric & Carpet Treatment:

Use DWG™ Fabric, Carpet & Upholstery Treatment (FCU) for cleaning your convertible top. To use FCU, spray onto a 2 ft by 2 ft section of the convertible top. Using a clean terry cloth towel or washcloth that is slightly damp (this prevents linting), drag the terry cloth across the area that you just sprayed. If the cloth becomes very dirty, use a clean section of the cloth, then drag the cloth back over the sprayed area in the opposite direction. Buff the newly cleaned section with a clean terry cloth towel and move on to another section. As with other cleaning procedures, change terry cloth if the cleaning cloth gets too dirty. Let the FCU do the work, don't try to exert extra pressure to remove dirt, you will only grind dirt into the fabric. The first cleaning with this procedure may require multiple terry cloth cleaning cloths, due to the fact that the convertible top is rarely truly cleaned by conventional car cleaners. Follow up cleanings will take less FCU and less effort, especially if you clean your convertible top once a month.

Tips and Tricks for Convertible Top Cleaning

• Maintenance cleanings can be done by using a damp (not soaking wet) terry cloth towel, and once again drawing the terry cloth first in one direction, then in the opposite direction.

Convertible Rear Window Detailing

Applying Dri Wash 'n Guard® Waterless Car Wash:
Clean the rear window just as you would any other car window, with DWG™ Waterless Car Wash. Remember to wet a terry cloth towel with the DRI WASH 'n GUARD® to apply to the window, do not spray directly onto the window itself. Use this technique for both plastic and glass convertible rear windows. Once again, buff with a clean DWG™ Buffing Towel. If you accidentally apply DWG™ Waterless Car Wash to the fabric, use DWG™ Upholstery, Fabric & Carpet Cleaner to remove.

Tips and Tricks for Convertible Rear Window Cleaning

• The mere act of physically getting to the rear window can be a trick in itself since many convertibles have little access room. It is worth repeating here - a small amount of Wash 'n Guard® goes a long way. You will encounter mostly dust mixed with environmental air pollutants on the rear window; the window will probably look cloudy or hazy before you start and this will give the impression that the window is very dirty, when in fact, the dust is usually removed very easily.

• Remember to use a terry cloth wetted with DRI WASH 'n GUARD® and avoid spraying directly onto the window.

SHOP NOW